![]() |
Visit our web shop! |
Leadshine high voltage AC servo drive ELP-D2000Z
- Easy tuning, flexible to control
Servo drive model: | ELP-D2000Z |
Rated output power: | 2000W |
Rated output current(A): | 12 |
Max output current(A): | 36 |
Dimensions(mm): | 80*175*156 |
Main power: | 1 or 3-phase 190Vac – 240Vac,50/60Hz |
Control power: | 1-phase 190Vac–240Vac, 50/60Hz |
Control mode: | IGBT SVPWM sinusoidal wave control |
Feedback mode: | 17bit single-turn incremental encoder/23bit multi-turn absolute encoder |
Input pulse: | 0-500kHZ,5V differential input |
Position band width: | 200HZ |
Electronic gear ratio: | 1~32767/1~32767 |
Analog input: | -10~10Vdc,input resistance 20KΩ, no isolation |
Velocity bandwidth: | 500HZ |
Input signal: | Di:9 inputs (common-cathode , common-anode ) Servo enable, over-travel inhibition, gain switching, command pulse inhibition, speed zero clamp, deviation counter clear, alarm clear |
Output signal: | Do:6 outputs ( 4 single-ended , 2 differential ) Alarm output, servo-ready, at-speed, zero-detection, velocity coincidence |
Encoder signal output: | A phase, B phase, Z phase, long-distance drive mode output |
Alarm function: | Over-voltage, under-voltage, over-current, over-load, encoder error, position deviation error, brake alarm, limit alarm, over-speed error etc. |
Debug software: | All setting values of current loop, velocity loop , position loop can be modified and saved with Motion Studio software , all setting values can be downloaded and uploaded |
Communication interface: | USB:Based on Modbus protocol (according to USB2.0 specification) RS485 |
Brake mode: | Built-in brake resistor or external resistor |
Adapt load inertia: | Less than 30 times motor inertia |
weight: | About 1.5-3Kg |